XIANG IN ENTERPRISE CO., LTD.

NAIA Member(Expired)

Paint Bucket of 15L to 20L.

The thickness of In-mold label for the 15-20L bucket we recommend using 80 microns or more.

For all the In-Mold label which thickness over 60 microns needs to have the label supply system to put the label in the injection machine.

IML can only use in PP and PE party cup.

Because the label material is OPP, there will be no recycle problem for using In-Mold label.

For all the In-Mold label which thickness over 60 microns needs to have the label supply system to put the label in the injection machine.

The thickness of In-mold label for the 1L-10L bucket we recommend using 60 microns or more.

For all the In-Mold label which thickness over 60 microns needs to have the label supply system to put the label in the injection machine.

If your injection machine does not have a label supply system.

You may choose the IML with a thickness of 20 microns.

Which can put the label into the injection machine manually.

Glossy type label is widely used in food container because the ink is between two layers of film.

That is why don't need to worry about the ink fall off and staying on the baby's hands.

Matt type label is using surface printing.

The ink is on the surface of the label, so this type of label is primarily using for the outside decoration and prevent direct contact with food.

Matt type label is using surface printing.

The ink is on the surface of the label, so this type of label is primarily using for the outside decoration and prevent direct contact with food.